Forum Replies Created

Viewing 15 replies - 1 through 15 (of 19 total)
  • Thread Starter cwinkler

    (@cwinkler)

    Now last thing, every time I save a draft, it adds extra space between <p> marks.

    so if I change it a couple times, the space between the paragraphs increases. while it only shows up in the editor, and not on the page, why would the blog start adding all this space between the code?

    Thanks again,

    Thread Starter cwinkler

    (@cwinkler)

    I see what I did, I left the { in the part you wanted added.

    Now it works fine!

    Thanks so much, it has prevented me from blogging on a very important court ruling for personal freedom & privacy.

    I REALLY APPRECIATE YOUR HELP WEBJUNK!!!!!

    Thread Starter cwinkler

    (@cwinkler)

    #1 does nothing

    #2 takes down the site.

    Do I add it after the info above it, or do I replace it with?

    Thread Starter cwinkler

    (@cwinkler)

    I don’t have those brackets on my doc.

    I see this:

    // Disable magic quotes at runtime. Magic quotes are added using wpdb later in wp-settings.php.
    set_magic_quotes_runtime( 0 );
    @ini_set( ‘magic_quotes_sybase’, 0 );

    and later , this

    // Add magic quotes and set up $_REQUEST ( $_GET + $_POST )
    wp_magic_quotes();

    When I changed the first one like you said, it did nothing.

    Your help is really appreciated!

    Thread Starter cwinkler

    (@cwinkler)

    And every time I save the draft, it puts another backward slash, so now it’s like this:
    <p>In a stunning blow to oppressive big government misapplication of laws against honest citizens, <a href=\\"http://blog.washingtonpost.com/story-lab/2010/09/wiretapping_charges_dropped_ag.html\\" target=\\"_blank\\"><strong>a Hartford county circuit judge bitch slaps the state of Maryland</strong></a>, and rules that a citizens use of a camera to record the rogue actions of its state troopers, who pulled a gun on a speeding motorcyclist, do NOT fall under the antiquated wiretap laws of the 1970's.</p>

    Thread Starter cwinkler

    (@cwinkler)

    And every time I save the draft, it puts another backward slash, so now it’s like this:
    <p>In a stunning blow to oppressive big government misapplication of laws against honest citizens, <a href=\\"http://blog.washingtonpost.com/story-lab/2010/09/wiretapping_charges_dropped_ag.html\\" target=\\"_blank\\"><strong>a Hartford county circuit judge bitch slaps the state of Maryland</strong></a>, and rules that a citizens use of a camera to record the rogue actions of its state troopers, who pulled a gun on a speeding motorcyclist, do NOT fall under the antiquated wiretap laws of the 1970's.</p>

    Thread Starter cwinkler

    (@cwinkler)

    As you can see, the 2nd ppg above has the backslash that WP is putting in the code, yet wordpress does not mind in my post after webjunks 1st reply.

    Yet when I preview on my blog, one of the links it sends is: http://www.eyespypro.com/blog/%5C%5C%22http:/www.eyespypro.com/blog/death-of-the-spy-camera/%5C%5C%22

    which is garbage and gives me errors. And any images I paste are jibberish also.

    Does this help?

    Thread Starter cwinkler

    (@cwinkler)

    Interesting, now when I paste in the backward slash here as code, it shows up just fine here. WP actually does not have a problem displaying it, yet I get errors when I preview the page on my blog. I’ll try again and will paste between the code quotes to see what it is doing.
    <p>In a stunning blow to oppressive big government misapplication of laws against honest citizens, <a href="http://blog.washingtonpost.com/story-lab/2010/09/wiretapping_charges_dropped_ag.html" target="_blank"><strong>a Hartford county circuit judge bitch slaps the state of Maryland</strong></a>, and rules that a citizens use of a camera to record the rogue actions of its state troopers, who pulled a gun on a speeding motorcyclist, do NOT fall under the antiquated wiretap laws of the 1970's.</p>
    <p>In a stunning blow to oppressive big government misapplication of laws against honest citizens, <a href=\"http://blog.washingtonpost.com/story-lab/2010/09/wiretapping_charges_dropped_ag.html\" target=\"_blank\"><strong>a Hartford county circuit judge bitch slaps the state of Maryland</strong></a>, and rules that a citizens use of a camera to record the rogue actions of its state troopers, who pulled a gun on a speeding motorcyclist, do NOT fall under the antiquated wiretap laws of the 1970's.</p>

    Thread Starter cwinkler

    (@cwinkler)

    I have not seen this problem in the 4 years I have been using WP.

    I paste in this:

    <p>In a stunning blow to oppressive big government misapplication of laws against honest citizens, a Hartford county circuit judge bitch slaps the state of Maryland, and rules that a citizens use of a camera to record the rogue actions of its state troopers, who pulled a gun on a speeding motorcyclist, do NOT fall under the antiquated wiretap laws of the 1970’s.</p>

    and when I hit “Save Draft”, it changes it to this:

    <p>In a stunning blow to oppressive big government misapplication of laws against honest citizens, a Hartford county circuit judge bitch slaps the state of Maryland, and rules that a citizens use of a camera to record the rogue actions of its state troopers, who pulled a gun on a speeding motorcyclist, do NOT fall under the antiquated wiretap laws of the 1970’s.</p>

    It has nothing to do with Dreamweaver, it’s just code. This is how I have been doing things for years and all of a sudden it’s WP that is doing this.

    I recently upgraded to the latest version, and using a custom theme. I have asked my coder for help, just wondering if anyone else can help.

    Thread Starter cwinkler

    (@cwinkler)

    Any help please?

    Repaired disc & permissions on my Mac by booting on start up disc. Tried to post again, saved draft, and bam! Slashes on both ends of any URL or link.

    Anyone else have this problem?

    Any help is greatly appreciated.

    cwinkler

    (@cwinkler)

    esmi, you did not answer her question, what is pluggable.php?

    I would like to know as I see it is involved with php mailing, and I am wondering how it got installed, through wp or ?

    Please help & thank you in advance.

    Got it to work just fine.

    How do I enable the captcha that you have on your form on your site?

    thanks

    Thread Starter cwinkler

    (@cwinkler)

    Hi:

    I tried to add this to the sites .htaccess file and it did not work, then i took a text document and added that info and called it .htaccess and put it in the custom theme folder and it’s not working. It eliminates my custom theme and still does not work. I’ll have to pay someone to fix this unless someone else can be of help.

    Thanks!

    it is installed & working, and I had a guy integrate it into my website, so I’ll contact them to see what is going on.
    The dashboard is there, no tabs to add or modify posts, and when I click to see recent comments, I get this:

    You do not have sufficient permissions to access this page.

    logged in as admin, yet it says I don’t have permissions when I try to find out how to add a post. Any help is appreciated. Fresh install.

Viewing 15 replies - 1 through 15 (of 19 total)