Description
Integration for ActiveCampaign sends every new form submission straight to your ActiveCampaign account. Pick a form, choose what to create (a contact, an account, a deal or an email list subscription), match the form fields to the ActiveCampaign fields, send a test record, and you are live.
Why Use This Plugin?
- Stop copying form entries into ActiveCampaign by hand
- Create contacts, accounts, deals and email list subscriptions from any supported form
- Map standard and custom ActiveCampaign fields, with values converted to the right type
- See what happened to every entry in the Logs
- No coding or API knowledge needed
Supported WordPress Form Plugins
- Contact Form 7
- WPForms
- Gravity Forms
- Formidable Forms
- Elementor Pro Forms
The form plugin must be active for its forms to appear in the wizard.
Supported ActiveCampaign Modules
- Contacts — a contact needs an email address
- Accounts — an account needs a name
- Deals — a deal needs a title and a linked contact or account
- Email Lists — a contact is found or created by email and added to the ActiveCampaign list you choose
Features
- Unlimited connections and integrations. Connect as many ActiveCampaign accounts and forms as you need. One integration creates one kind of record.
- Field mapping. The contact, account and deal fields come from your own ActiveCampaign account. For each field pick a form field, a default value, or a custom value (text with form fields inserted). Required fields are locked in. Values are converted for the field type: text, long text, number, amount, date, date and time, single choice and multiple choice.
- Custom fields. Map form fields to your own ActiveCampaign custom fields, for contacts, accounts and deals. In the field menu they are listed under “Custom fields”.
- Linked records. An account can be linked to a contact, and a contact to an account. A contact is found by email and an account by exact name, and created when it is not there. When several integrations belong to the same form they run in this order: Account, Contact, List, Deal.
- Deals module. Create deals from a form, in the pipeline and stage you choose, with an owner, a status (open, won or lost), custom fields and an optional task. A deal belongs to a linked contact or account.
- Email Lists module. Add a contact to an ActiveCampaign email list. The contact is found by email (or created), then subscribed. A contact that unsubscribed from the list is never added again, and the log says so.
- Record actions. Create or update, update only, or skip if exists. The existing record is the contact with the same email, the account with the same exact name, or the deal with the same exact title.
- Tags. Add tags to the contact, one per row. A tag that does not exist is created.
- Automations. Add the contact to an ActiveCampaign automation.
- Owner. Set the owner of an account or deal.
- Pipeline, stage and status. Choose the pipeline and stage of a deal, and its status (open, won or lost; fixed or from a form field).
- Notes. Add a note to the contact, account or deal, with form fields inserted.
- Tasks. Create a task for the deal, or for the contact in the Contact and Email List modules, due in a number of days, with a title, a type from your ActiveCampaign task types and an optional note.
- System fields. Map the page URL, the referrer and the UTM source, medium and campaign of the visit without adding hidden fields to your form.
- Filters. Send an entry only when your AND / OR conditions on form fields match. Entries that do not match are logged as Skipped.
- Test run. Send one real test record to your ActiveCampaign account before you go live. You confirm first. A test run never changes tags, starts an automation or creates a contact task.
- Logs. Every entry is logged with its result, the request and the response. Filter by status, integration, form, time and date. Failed and skipped entries are easy to find.
- Resync. Run a failed or skipped entry again from the Logs, one by one or in bulk. A resync checks the integration’s filter again and repeats only the steps that are missing or failed.
- Connections. Add, test, edit and remove ActiveCampaign connections. A clear “Reconnect needed” alert shows when ActiveCampaign no longer accepts an API key.
- Careful with your ActiveCampaign limits. Contact and account fields are cached for about ten minutes, with a Refresh fields button. Calls are spaced to stay under the limit of 5 requests per second, a rate-limit answer is recognised and reported, and failure emails are limited to one per connection and error type per hour.
- Safe connection. Your API key is stored encrypted, shown only as its last four characters, sent to ActiveCampaign only in a request header, and never written to the logs.
External services
This plugin connects to ActiveCampaign (https://www.activecampaign.com), the service you choose to send your form entries to. Without an ActiveCampaign connection the plugin does nothing and sends nothing.
ActiveCampaign API (your own account address):
You enter the API URL of your ActiveCampaign account, which looks like https://youraccount.api-us1.com, and the plugin calls <your API URL>/api/3.
- What it is used for: checking the API URL and key, reading your contact and account fields, lists, users, automations, pipelines and task types (when those options are used) so you can map them, and creating records from your form entries.
- When: when you add, edit or test a connection; when the integration wizard or Settings load your fields and lists (and when you press Refresh fields); when a form is submitted; and when you use Test run.
- Data sent: your API key (only in the
Api-Tokenrequest header); the form values you mapped, for example a name, email address, phone number, account name or deal value; the system fields (page URL, referrer, UTM values) if you mapped them; and, for linked records, the email or name used to find or create the linked contact or account. Each request also carries aUser-Agentheader with the plugin name and version and the address of your site (for exampleIntegrazoActiveCampaign/1.0.0; https://example.com). - Terms of service: https://www.activecampaign.com/legal/terms-of-service
- Privacy policy: https://www.activecampaign.com/legal/privacy-policy
The plugin makes no other external request. It contains links to https://integrazo.com/ (help and support); following a link is your choice and sends no data.
Privacy
- Sent: form values go from your site to your own ActiveCampaign account over HTTPS, only for the integrations you set up. See “External services” above.
- Stored on your site: your connections (name, API URL and the API key, stored encrypted and shown only as its last four characters); your integrations and mappings; and the logs, which keep the form values of each entry (each value cut to 2,000 characters), the request sent and the answer from ActiveCampaign. Logs can hold personal data such as names and email addresses, so keep them only as long as you need them.
- Short-lived data: the contact and account fields read from ActiveCampaign are cached as WordPress transients for about ten minutes; the list of your Elementor forms is cached for five minutes; short markers limit failure emails (one hour, with a counter kept for one day); and a small rate-limit marker is kept per connection.
- Failure emails: if an entry fails, a notice (error code and message, no form values) can be emailed to the addresses you set in Settings Notifications through your own WordPress mail.
- Retention and deletion: under Settings General, Keep logs for (days) removes older entries automatically (0 keeps them until you delete them), and Clear All Logs on the Logs page removes them at once. Deleting a connection removes it and its stored key; deleting an integration removes its log entries. When you delete the plugin,
uninstall.phpremoves the plugin’s tables, options and transients only if Delete all plugin data on uninstall is switched on (the default is to keep the data). On a multisite network each site’s own setting decides. - Cookies: the plugin sets no cookies and shows nothing to visitors; the form plugins you use do their own thing.
Screenshots







Installation
Automatic installation
- Go to Plugins Add New in your WordPress dashboard.
- Search for Integration for ActiveCampaign.
- Click Install Now and then Activate.
Manual installation
- Download the plugin ZIP file.
- Go to Plugins Add New Upload Plugin, upload the ZIP and click Activate.
Setup
- In ActiveCampaign open Settings Developer and copy the API URL and the API key.
- In WordPress go to ActiveCampaign Settings Connections and click Add Connection. Type a name, paste the API URL and the API key, and click Connect.
- Go to ActiveCampaign Integrations Add Integration, choose the form, the connection and what to create, map the fields, send a Test run and save.
FAQ
-
Where do I find the API URL and the API key?
-
In ActiveCampaign under Settings Developer. The API URL looks like
https://youraccount.api-us1.com. Paste it as shown there. The plugin accepts an https address (it removes a trailing/api/3or slash) and checks it, together with the key, with a real call before saving the connection. -
Which form plugins are supported?
-
Contact Form 7, WPForms, Gravity Forms, Formidable Forms and Elementor Pro Forms.
-
Which ActiveCampaign records can it create?
-
Contacts, accounts (companies), deals and lists. One integration creates one kind. A deal also needs a linked contact or a linked account, because ActiveCampaign refuses a deal with neither. Map an email or an account name to link one. A list integration adds a contact to an ActiveCampaign list.
-
I get “Your ActiveCampaign account has no deal pipeline”. What do I do?
-
A deal always belongs to a pipeline. Create one in ActiveCampaign under Deals, then click Refresh fields in the integration wizard (or under the connection) and send the entry again. The wizard shows this notice under the module selector when you choose Deal and the account has no pipeline.
-
What happens if the contact already exists?
-
That depends on the record action you choose in the integration: create, create or update, update only, or skip if exists. With create, ActiveCampaign refuses a second contact with the same email (and an account with the same name), so the Logs show the error together with the id of the existing record.
-
Where are the logs?
-
Under ActiveCampaign Logs. Every entry has a status, the request sent and the answer from ActiveCampaign. Filter by status, integration, form and time, and clear the logs when you like.
-
What does “Reconnect needed” mean?
-
ActiveCampaign no longer accepts the API key, for example because it was changed or the user was removed. Click Edit on the connection under Settings Connections and enter a valid key. New entries are not sent until you do. Your integrations are kept.
-
What does Test run do?
-
It opens a window with one box for each mapped field. Type a sample value in each box, press Run test, and one real record is sent to your ActiveCampaign account; the result (or the error) is shown in the same window. Delete the test record in ActiveCampaign when you no longer need it.
-
Why was a value left out?
-
ActiveCampaign stores a value only if it fits the field. A date must be a date, a number a number, and a single or multiple choice value must match one of the options (upper and lower case do not matter). A value that does not fit is left out and the log says so.
-
What does the Email List module do?
-
It finds the contact by email (or creates it) and adds it to the ActiveCampaign list you choose in Step 1. A contact that already unsubscribed from that list is not added again, and the log says so. The contact fields are mapped like in the Contact module.
-
Can I attach files from the form?
-
No. ActiveCampaign does not take files through its API, so file-upload fields are not offered in the field mapping.
-
Is my form data sent to Integrazo?
-
No. Form values go only from your site to your own ActiveCampaign account. The plugin sends nothing to Integrazo.
-
What happens to my data when I delete the plugin?
-
By default nothing is removed. Turn on Delete all plugin data on uninstall in Settings General first if you want connections, integrations and logs deleted with the plugin.
Reviews
There are no reviews for this plugin.
Contributors & Developers
“Integration for ActiveCampaign – Contact Form 7, WPForms, Elementor, Gravity Forms and More” is open source software. The following people have contributed to this plugin.
ContributorsInterested in development?
Browse the code, check out the SVN repository, or subscribe to the development log by RSS.
Changelog
1.0.0
- Initial release.
