should still work. Can you share a link to the form?
Thread Starter
rfmf
(@rfmf)
Hey, unfortunately it is a local installation. But i figured out, that it works without combining conditions. If someone has the same problem, here is the markup:
<div class=”col-xl-4 col-md-4 mb-50″>
<label>tariff</label>
[select tariff first_as_label “choose tariff” “tariff 1” “tariff 2” “tariff 3″]
</div>
<div class=”col-xl-4 col-md-4 mb-50”>
<label>package</label>
[group sel-t1 clear_on_hide]
[select t1 first_as_label “package” “t1A” “t1B” “t1C”][/group]
[group sel-t2 clear_on_hide]
[select t2 first_as_label “package” “t2A” “t2B” “t2C”][/group]
[group sel-t3 clear_on_hide]
[select t3 first_as_label “package” “t3A” “t3B” “t3C”][/group]
</div>
<div class=”col-xl-4 col-md-4 mb-50″>
[group group-t1 clear_on_hide]
[group t1A clear_on_hide]T1A[/group]
[group t1B clear_on_hide]T1B[/group]
[group t1C clear_on_hide]T1C[/group]
[/group]
[group group-t2 clear_on_hide]
[group t2A clear_on_hide]T2A[/group]
[group t2B clear_on_hide]T2B[/group]
[group t2C clear_on_hide]T2C[/group]
[/group]
[group group-t3 clear_on_hide]
[group t3A clear_on_hide]T3A[/group]
[group t3B clear_on_hide]T3B[/group]
[group t3C clear_on_hide]T3C[/group]
[/group]
</div>
And conditions:
show [sel-t1] if [tariff] equals “tariff 1”
show [sel-t2] if [tariff] equals “tariff 2”
show [sel-t3] if [tariff] equals “tariff 3”
show [group-t1] if [tariff] equals “tariff 1”
show [group-t2] if [tariff] equals “tariff 2”
show [group-t3] if [tariff] equals “tariff 3”
show [t1A] if [t1] equals “t1A”
show [t1B] if [t1] equals “t1B”
show [t1C] if [t1] equals “t1C”
show [t2A] if [t2] equals “t2A”
show [t2B] if [t2] equals “t2B”
show [t2C] if [t2] equals “t2C”
show [t3A] if [t3] equals “t3A”
show [t3B] if [t3] equals “t3B”
show [t3C] if [t3] equals “t3C”
