maxco7

Forum Replies Created

Viewing 6 replies - 1 through 6 (of 6 total)
  • Forum: Plugins
    In reply to: [Wordfence Security - Firewall, Malware Scan, and Login Security] Rate Limiting & Brute Force
    Thread Starter maxco7

    (@maxco7)

    5 months ago

    Hi @dimalifragis (the 403 was the response listed on Wordfence) Below is the settings I have and a list of some attacks as you can see about 35 in 1 minute but settings are at Max 15. Is is just some of the report it goes on for 100’s. Really appreciate any advice. Thank you.

    Enable Rate Limiting and Advanced Blocking: This checkbox enables all blocking/throttling functions including IP, country, and advanced blocking, as well as the “Rate Limiting Rules” below.

    ON
    Google’s Crawlers Treatment: Verified Google crawlers will not be rate-limited.

    Rate Limiting Rules:
    General Requests Limit:

    If anyone’s requests exceed 15 per minute, block it.
    Note: Very strict. May cause false positives.
    Crawler-Specific Limits:

    If a crawler’s page views exceed 15 per minute, block it.
    If a crawler’s pages not found (404s) exceed 15 per minute, block it.
    Note: Very strict. May cause false positives.
    Human User Limits:

    If a human’s page views exceed 15 per minute, block it.
    If a human’s pages not found (404s) exceed 15 per minute, block it.
    Note: Very strict. May cause false positives.
    IP Address Blocking Duration: An IP address is blocked for 30 minutes when it breaks a rule.

    Date & Time: 11/14/2023
    Location: Eygelshoven, The Netherlands
    IP Address: 45.137.203.99
    Host: tube-hosting.com
    Status: 403 (Forbidden Access)

    Access Attempts:

    1. 5:44:23 AM – /admin/upload/
    2. 5:44:23 AM – /wp-diambar/includes/
    3. 5:44:22 AM – /wp-content/uploads/simple-fil…
    4. 5:44:21 AM – /wp-content/themes/zakra/
    5. 5:44:21 AM – /wp-content/themes/pridmag/
    6. 5:44:20 AM – /wp-content/themes/wp-pridmag/
    7. 5:44:19 AM – /wp-content/themes/twentyfive/
    8. 5:44:19 AM – /wp-content/themes/thuoc-nam/
    9. 5:44:18 AM – /wp-content/themes/sketch/
    10. 5:44:18 AM – /wp-content/themes/rishi/
    11. 5:44:17 AM – /wp-content/themes/alera/
    12. 5:44:16 AM – /wp-content/plugins/core-stab/
    13. 5:44:16 AM – /wp-content/plugins/zaen/inclu…
    14. 5:44:14 AM – /wp-content/plugins/wpeazvp/
    15. 5:44:14 AM – /wp-content/plugins/wp-hps/sh/
    16. 5:44:13 AM – /wp-content/plugins/wp-freefor…
    17. 5:44:13 AM – /wp-content/plugins/wp-diambar…
    18. 5:44:12 AM – /wp-content/plugins/Uwogh-Segs…
    19. 5:44:11 AM – /wp-content/plugins/ubh/
    20. 5:44:11 AM – /wp-content/plugins/random/
    21. 5:44:10 AM – /wp-content/plugins/prenota/
    22. 5:44:09 AM – /wp-content/plugins/owfsmac/
    23. 5:44:09 AM – /wp-content/plugins/limit/
    24. 5:44:08 AM – /wp-content/plugins/home/
    25. 5:44:07 AM – /wp-content/plugins/cekidot/
    26. 5:44:06 AM – /wp-content/plugins/cakil/
    27. 5:44:06 AM – /wp-content/plugins/cache-word…
    28. 5:44:05 AM – /wp-content/plugins/BrutalShel…
    29. 5:44:04 AM – /wp-content/plugins/aryabot/
    30. 5:44:04 AM – /wp-content/plugins/linkprevie…
    31. 5:44:03 AM – /wp-content/ALFA_DATA/alfacgia…
    32. 5:44:03 AM – /ubh/
    33. 5:44:02 AM – /cekidot/
    34. 5:44:01 AM – /cakil/
    35. 5:44:00 AM – /cache-wordpress/
    Forum: Plugins
    In reply to: [Wordfence Security - Firewall, Malware Scan, and Login Security] Rate Limiting & Brute Force
    Thread Starter maxco7

    (@maxco7)

    5 months ago

    @dimalifragis no I am not using recaptcha. The response is 403. Here is some from today. Although I have rate limiting on everything as per above. I dont understand why they are not blocked after the 15th attempt in 1 minute. I can’t see any other settings that I can tweak to stop it.

    Amsterdam, The Netherlands
    /admin/upload/ 11/13/2023 10:41:38 AM 13.95.89.80 13.95.89.80 403
    Amsterdam, The Netherlands
    /wp-diambar/includes/ 11/13/2023 10:41:38 AM 13.95.89.80 13.95.89.80 403
    Amsterdam, The Netherlands
    /wp-content/uploads/simple-fil… 11/13/2023 10:41:37 AM 13.95.89.80 13.95.89.80 403
    Amsterdam, The Netherlands
    /wp-content/themes/zakra/ 11/13/2023 10:41:36 AM 13.95.89.80 13.95.89.80 403

    Forum: Plugins
    In reply to: [Wordfence Security - Firewall, Malware Scan, and Login Security] Rate Limiting & Brute Force
    Thread Starter maxco7

    (@maxco7)

    5 months ago

    Hi, No I am not using a Caching plugin. I have all rate limiting set to block for 30mins (15/minute) – BUT that is not the issue, I am still getting about 100 attacks from the same IP address within a minute (like from the above). I am not understanding why they are not getting blocked after 15th attempt within a minute. Looking in Live traffic to see.

    Forum: Plugins
    In reply to: [PDF Invoices & Packing Slips for WooCommerce] Skipping invoice numbering
    maxco7

    (@maxco7)

    4 years, 6 months ago

    Hi Ewout
    I am having the same issue. I am running 2.3.4.
    I am getting 1 order number (only 1 transaction in orders) but getting emailed 2 emails with 2 different invoice numbers (same order number).

    So do i need to disable IPN or PDT?
    Disable in WooCommerce or in Paypal?

    Thank you so much for your help.

    maxco

    Forum: Plugins
    In reply to: [Simple Divi Shortcode] Solution – The proper way for the NEW Divi
    maxco7

    (@maxco7)

    4 years, 7 months ago

    Hi I having same issue, styles not coming across as well.
    I just have the shortcode in a fullwidth code module.

    This code above:
    <div id=”et-boc” class=”et-boc”>
    <div id=”et_builder_outer_content” class=”et_builder_outer_content”>
    <?php echo do_shortcode( ‘[showmodule id=”4405″]’ ); ?>
    </div>
    </div>

    Where do I put it? Doesn’t work in code module – tried to put in plugin but didnt work. Could you please advise how and where to put this with the standard plugin. Sorry not very experience in coding.

    I tried in the plugin:
    <div id=”et-boc” class=”et-boc”>
    <div id=”et_builder_outer_content” class=”et_builder_outer_content”>
    <?php
    //[showmodule id=”866″]

    //Exit if direct access
    defined( ‘ABSPATH’ ) or die( ‘No script kiddies please!’ );
    // Function to show the module

    function showmodule_shortcode($atts) {
    $atts = shortcode_atts(array(‘id’ => ”), $atts);
    return do_shortcode(‘[et_pb_section global_module=”‘.$atts[‘id’].'”][/et_pb_section]’);

    }

    add_shortcode(‘showmodule’, ‘showmodule_shortcode’);

    ?>
    </div>
    </div>

    but didn’t work.

    Thanks heaps.

    Forum: Plugins
    In reply to: [Mail Bank - #1 Mail SMTP Plugin for WordPress] Incorrect SMTP Server being used
    maxco7

    (@maxco7)

    6 years, 3 months ago

    I am having the same issue (sent screenshots to support@). Have checked with server and there is no firewall blocking. Have uninstalled and reinstalled plugin. The sent from in step 1 and email address fields match.
    Have send screenshots and log to your support.
    Thanks in advance for any help.

Viewing 6 replies - 1 through 6 (of 6 total)