the saved data is often gone and conditional logic problem

  • Resolved IraCamirai

    (@iracamirai)


    3 years, 11 months ago

    Hi,
    fortunately I managed to get the price calculation right, it works great until recently.
    Recently the plugin doesn’t seem to save input in the backend, especially concerning the new if conditions in the formulas. I save, when I go back in, the saved data is often gone or the display is just like this: —-

    I tried all possible measures, empty caches, save x times to DB, empty transient cache, Server settings optimized, delete all other products with the CPO Builder, each variable has its own slug, deactivate another plugins, nothing helps. JS errors are not displayed. Of course, I have also observed the order of the fields, read the docu …

    This also applies to the dynamic display of fields in the frontend with conditional logic conditions such as (example) show the field if uni_nov_cpo_var1 greater 60 and/or uni_nov_cpo_var1 less 70 … it only works correctly with 2 fields, not with others.

    Is there an overview of how to build complex logic conditions? I have searched a lot …

    many thanks for an answer,
    regards

    • This topic was modified 3 years, 11 months ago by IraCamirai.
    • This topic was modified 3 years, 11 months ago by IraCamirai.
    • This topic was modified 3 years, 11 months ago by IraCamirai.
    • This topic was modified 3 years, 11 months ago by IraCamirai.

    The page I need help with: [log in to see the link]

Viewing 15 replies - 1 through 15 (of 17 total)
1 2
  • Plugin Author moomooagency

    (@moomooagency)

    3 years, 11 months ago

    Hi,

    I think you have overwritten your options from another product(s). The symptoms are pointing to this issue. But it is not obvious as in the builder when viewing the configuration of certain product it seems like everything is ok. It is because the data has been overwritten in the DB only. In the configs it remains the same.

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    Hi,

    many thanks for your answer, but I delete all other products with the CPO Builder, the NOV is only in this product, the conditional logic for fields too.

    The entries in the DB are overwritten if you choose unsyc and then sync again, right?
    What is the best way to clean up the database for the Builder? I see / compare the right CPO option ID in my fields and in the Backend CPO options.

    I have the impression that the NOV does not work properly, even with additional if statements in the formula calculation; is there a way to control the NOV in the console? The output in the frontend is only possible in the Pro version, right?

    Do you have an example of a product with complex if loops for price calculation (not for Pro) somewhere?

    many thanks for an answer,
    regards

    • This reply was modified 3 years, 11 months ago by IraCamirai.
    • This reply was modified 3 years, 11 months ago by IraCamirai.
    • This reply was modified 3 years, 11 months ago by IraCamirai.
    Plugin Author moomooagency

    (@moomooagency)

    3 years, 11 months ago

    Hi,

    Not sure what I can say here. If you think that NOV does not work properly, then please write down the exact steps to reproduce the issue on my installation.

    Otherwise it is an issue with the configuration of your product. We offer a paid configuration service. Please, let me know if you are interested in.

    “The entries in the DB are overwritten if you choose unsyc and then sync again, right?
    What is the best way to clean up the database for the Builder?”
    No, by simply syncing/unsyncing you will not overwrite anything in DB. You don’t have to clean up the DB specifically to work for Uni CPO.

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    Hi,

    which costs should I expect?

    regards

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    Hi,

    when do i usually take “add group”?

    regards

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    “add group”
    That’s where the rabbit seems to be in the pepper

    Plugin Author moomooagency

    (@moomooagency)

    3 years, 11 months ago

    Resolved?

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    Hi,

    Fortunately, with the formulas, yes.
    Not yet, unfortunately; with the Field conditional logic builder, it just doesn’t seem to work to show and hide multiple fields after requesting the size of a variable.
    I have tried all variants. Normally, if the variable is > 30 and < 40, the field should be shown, which is possible, but if the 2nd field should be shown when the variable is > 40 and < 50, the 3rd when > 50 < 60 and so on, it doesn’t work, no matter if I take bigger-smaller or between. Only if I enter the condition > 40 (or < … e.g.) for the 2nd and further fields alone, it will be displayed, but then all fields are displayed at the end, which should not be the case.

    regards

    Plugin Author moomooagency

    (@moomooagency)

    3 years, 11 months ago

    Please, show how did you configure it?

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    Sorry, I’m not getting a message, I just saw it now

    the view: example
    https://arthouse39.de/wdl/produkt/cpo.jpg

    the Link:
    (https://arthouse39.de/wdl/produkt/hardox-500-zuschnitt-generator-r-q-1/)

    PS: when i take an input value from the form, it works, but with the variable not correct. But it must be the variable, otherwise it becomes too imprecise

    If you want to have access to the backend, I will set it up,

    regards

    • This reply was modified 3 years, 11 months ago by IraCamirai.
    • This reply was modified 3 years, 11 months ago by IraCamirai.
    Plugin Author moomooagency

    (@moomooagency)

    3 years, 11 months ago

    Your product does not work for me. I tried to change this and that – nothing changes.

    Also, I do not really understand your setup. What should I choose? What should I expect? How exactly did you configure this part?

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    the value of the Variable can be compared in the frontend with the value in the bottom right-hand corner under “Gewicht kg” (I calculate it with jQuery in an extra function)

    Actually, if you enter e.g. in the form (material thickness) Materialstärke: 10, (length) Länge: 690, (width) Breite: 570, the field for the surcharge 31 kg should be displayed; from 40 kg (e.g. 10, 800, 630) another field for the surcharge from 40 kg should be displayed, etc., but it does not work

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    Field conditional logic builder

    variable greater or equal 40 …. works

    variable between 50,
    59.99
    …works not

    as far as I can see, it’s about the class “cpo-visible-field”, in which file can I possibly edit it?

    regards

    Plugin Author moomooagency

    (@moomooagency)

    3 years, 11 months ago

    Probably it is better when you tell me the exact steps I have to follow to reproduce the issue on my localhost. You can send an email.

    Thread Starter IraCamirai

    (@iracamirai)

    3 years, 11 months ago

    Ok, I send on sales@…
    many thanks,
    have a nice time …,
    be safe …

Viewing 15 replies - 1 through 15 (of 17 total)
1 2
  • The topic ‘the saved data is often gone and conditional logic problem’ is closed to new replies.