Hello Vyacheslav!
Could you indicate me if this issue appears with all controls (LCD, gauge, etc.) or just one?
Have you activated (checked) the option “Adjusted whenever possible” in “settings/display/gauge boundaries” or not?
Thanks
Pierre
Hello Pierre!
This problem occurs when you use the Clean gauge and Steel meter. In particular, the display incorrectly Atmospheric pressure, Cloudiness.
Option “Adjusted whenever possible” is selected.
Thanks
one more nuance. The scale of the atmospheric pressure is not correctly displayed, if the units are listed mmHg.
Vyacheslav,
thanks again for identifying these 2 issues. I’ve found the 2 errors and will publish an updated version (3.0.2) this night…
Don’t hesitate if you’ve found other issues π
Pierre
Done!
Could you confirm the new version fixes the errors?
Thanks.
Pierre
Hello Pierre!
I confirm that the new version of the bugs fixed!
Thank
Vyacheslav
Hello Pierre!
He discovered the same problem with the power of wind. I specify in the settings of the upper value of 15 m/s, and then save the settings, but the upper value specified 1,2 m/s.
Thanks
It is interesting that this error is on the site, but on a local server, no error.
Huhu, you’re absolutely right.
Will be corrected in the 3.0.3 release (this night).
Pierre
Hello Pierre!
I have completed the update to version 3.0.3, but the problem has not been solved.
Thanks
Vyacheslav
Hello!
I was “abused” by your sentence “I discovered the same problem” π
In fact there was two problems (not for every user, but for you, yes). The 3.0.4 (published now) should corrects this issue… Coud you confirm?
Pierre
Hello Pierre!
Yes, this problem is solved.
Why is this error for all users, but only for me?
Thanks
Vyacheslav
Great news!
It was not “you” in particular, it was for users of “virtual stations” or Weather Underground stations with wind speed units different of km/h. For all other users (netatmo stations, clientraw, realtime and for those using km/h units) it was not the case π
Pierre