Title: Set Up Tracking Codes
Last modified: August 20, 2016

---

# Set Up Tracking Codes

 *  Resolved [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * (@wdb07159)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/)
 * I’ve got a wordpress site with a landing page with opt in. Trying to install 
   tracking and seem to be going round in circles. Am using directCPV as traffic
   source. Basically I want to track the URLs and keywords that result in traffic
   to my page.
 * Firstly looked at DirectCPV that asks you to add tracking IDs to your URL. I 
   couldn’t find any info on how to correctly add the tracking codes to the end 
   of the URL that points to my own landing page. Note: This is a LP I made myself
   on WordPress with WPoptin plug in.
 * Then looked at prosper202 as it said this is easier to use and followed the instructions.
   It says load the files up to root of the domain but I can’t as one of the files
   robots.txt will conflict with another file named the same for attracts SEO plugin.
   There was also a WP plug in for prosper202 but some are saying it is not working/
   is outdated and may cause issues in a current wordpress site. On site link it
   says compatible up to 2.92 but WP is now on 3.5:
 * [http://wordpress.org/extend/plugins/prosper202-tracking-plugin/](http://wordpress.org/extend/plugins/prosper202-tracking-plugin/)
 * Spent about 2 days going round in circles and reading forum after forum and want
   to get this resolved pretty soon.
 * Hopefully someone can point me in the right direction.
 * Thanks
 * Andrew

Viewing 13 replies - 1 through 13 (of 13 total)

 *  [tomontoast](https://wordpress.org/support/users/tomontoast/)
 * (@tomontoast)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269861)
 * I would just install google analytics if I were you. Its so simple to use, easily
   integrated into wordpress and can track much more than just keywords and URLs.
 *  Thread Starter [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * (@wdb07159)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269863)
 * Thanks for the reply
 * I do have GA but didn’t know that it could track down to the level I was wanting–
   URLs/Keywords etc. Thought it just showed traffic levels.
 * Thanks
 * A
 *  [tomontoast](https://wordpress.org/support/users/tomontoast/)
 * (@tomontoast)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269869)
 * Try it out! It can even do real time tracking.
 *  Thread Starter [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * (@wdb07159)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269875)
 * Because I am using DirectCPV as traffic source i’d like to track the keywords
   and URLs that traffic comes from to my site.
 * I’m not sure but it looks like I need to set up custom variables?
 *  [tomontoast](https://wordpress.org/support/users/tomontoast/)
 * (@tomontoast)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269877)
 * I don’t understand what you mean by
 * >  I am using DirectCPV as traffic source
 *  Thread Starter [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * (@wdb07159)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269880)
 * Direct CPV is where my landing page is being used as a destination URL and this
   will drive traffic to my link. I realise there may also be organic traffic but
   I wanted to be able to track the difference between organic and paid traffic 
   to my landing page. Basically see what keywords/URLs are effective in driving
   traffic to my page.
 *  [tomontoast](https://wordpress.org/support/users/tomontoast/)
 * (@tomontoast)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269883)
 * I have to say I don’t fully understand the model so I might not be of much help.
 *  Thread Starter [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * (@wdb07159)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269884)
 * I’m pretty much in the same boat until yesterday although can’t get the tracking
   right.
 * No problem thanks anyhow
 *  [tomontoast](https://wordpress.org/support/users/tomontoast/)
 * (@tomontoast)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269885)
 * Reading [http://www.lukepeerfly.com/tracking-keywords-urls-directcpv](http://www.lukepeerfly.com/tracking-keywords-urls-directcpv)
   each piece of traffic can add a bit onto the url to tell it about where it came
   from. You just need to create a page say lp.php which reads the url saves it 
   to a file and then redirects the user onto your main wordpress site.
 *  Thread Starter [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * (@wdb07159)
 * [13 years, 5 months ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269889)
 * Basically I have a landing page of my creation on a WordPress site and when the
   optin fills in details they are then sent to the main affiliate promotion, so
   the tracking I want to firstly see is the traffic source URL/Keyword (from DirectCPV)
   that sent the lead to my landing page, so I need to have tracking directly in
   DirectCPV. In DirectCPV the destination URL is my own landing page.
 * I only have one affiliate link right now and that is a redirect from aweber when
   the optin adds name/email details to landing page it redirects them straight 
   to my affiliate link so I don’t really need to track the source of that right
   now (but am anyway see below), although if I end up with more affiliate links
   in my blog, which I will be doing, I can add tracking IDs to the affiliate link
   in other places so I can distinguish between them. Doing this will tell me where
   they came from to the affiliate link but not the keyword or URL destination –
   meaning organic traffic, not paid directCPV traffic.
 * So at the end of the affiliate link redirect in aweber I have ‘?tid=LANDINGPAGE’
 * So I know it is the landing page. However if I add other affiliate links to my
   blog I will want to know the URL and/or keyword
    -  and
 *  also where the traffic came from (post 1/2/3 etc.). Basically right now I want
   to track URL/Keyword source of paid traffic that goes to my landing page.
 * Hope that makes sense!
 *  [dschroed](https://wordpress.org/support/users/dschroed/)
 * (@dschroed)
 * [13 years ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269918)
 * Did you ever find out how to do this? I have my own landing page, which links
   to my own website. I have been unable to code Directcpv, Prosper202, my landing
   page, and my website correctly to track the keywords used by people who ultimately“
   Click Here”. Google Analytics does not track the keywords because traffic is 
   sent to the landing page from Directcpv (only showing a referral link).
 * Any advice would be greatly appreciated.
 *  [WPyogi](https://wordpress.org/support/users/wpyogi/)
 * (@wpyogi)
 * [13 years ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269919)
 * **[@dschroed](https://wordpress.org/support/users/dschroed/)** – this thread 
   is marked resolved – so you’ll likely have better luck getting help if you start
   a new thread per the forum guidelines – [http://codex.wordpress.org/Forum_Welcome#Where_To_Post](http://codex.wordpress.org/Forum_Welcome#Where_To_Post)
 *  Thread Starter [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * (@wdb07159)
 * [13 years ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269920)
 * First off apologies for posting in a resolved thread but want to close off the
   query from WPyogi and anyone else looking for answers. In short no never got 
   it working with proper202, I can’t remember what was the problem but I do know
   proper was not the correct thing to use for the set up I had. I think it might
   have been integration with WP was the problem. That could have changed by now
   i’m not sure Y/N.
 * I found very little on the web in the way of individual help and knowledge for
   proper202, just standard help files and a dead forum. Sorry can’t help you more
   but I got frustrated and binned trying to use it.

Viewing 13 replies - 1 through 13 (of 13 total)

The topic ‘Set Up Tracking Codes’ is closed to new replies.

 * In: [Fixing WordPress](https://wordpress.org/support/forum/how-to-and-troubleshooting/)
 * 13 replies
 * 4 participants
 * Last reply from: [wdb07159](https://wordpress.org/support/users/wdb07159/)
 * Last activity: [13 years ago](https://wordpress.org/support/topic/set-up-tracking-codes/#post-3269920)
 * Status: resolved

## Topics

### Topics with no replies

### Non-support topics

### Resolved topics

### Unresolved topics

### All topics
