WordPress.org

Support

Support » How-To and Troubleshooting » Semiologic – technorati tags

Semiologic – technorati tags

  • Everything seems to work fine but the tags accumulate so that:

    Post 1

    apples, oranges

    Post 2

    apples, oranges, pears, fruit

    Post 3

    apples, oranges, pears, fruit, grapes, Mrs. Smith

    This is not good on an aggregator.

Viewing 15 replies - 1 through 15 (of 17 total)
  • not sure what you mean… :/

    Not sure I can explain it much better but:

    Post 1
    Headline
    text……………………………………………

    tags “tag 1, tag 2”
    —————————————————————————
    Post 2
    Headline
    text……………………………………………

    tags “tag 1, tag 2, tag 3, tag 4, tag 5”
    —————————————————————————
    Post 3
    Headline
    text……………………………………………

    tags “tag 1, tag 2, tag 3, tag 4, tag 5, tag 6, tag 7, tag 8”
    —————————————————————————-
    Post n+1
    Headline
    text……………………………………………

    tags “tag 1, tag 2, tag 3, tag 4, tag 5, tag 6, tag 7, tag 8…….tag 222”
    —————————————————————————-

    For every post all of the tags generated for all of the proceeding posts are included as tags for that post.

    It gets to be a very big blog of text very fast.

    url?

    http://info-syn.com

    I don’t have the plug in activated at the moment for the obvious reason. However, if you drop me an email at jaycurrie@gmail.com with a time you’ll check I’ll put it up for a few minutes. I am on Pacific time.

    Alternatively, I could send you a screen shot…Let me know

    Hi Denis –

    I’m actually having quite a different problem with integration with Jerome’s Keywords. Clicking on the tags in the posts results in a 404 error (which on my site currently redirects to a hotel site of mine – something that needs to be changed..)

    URL of example: http://knives.vsgd.com/how-to-measure-blade-length/

    Any suggestions you can provide would be appreciated! Thx

    – Emily from “How to Blog”

    @emily: edit and save your permalink structure (even without changing anything) as suggested by Jerome?

    @denis: That did the trick. Thanks for the help and the fast response!

    Hi Denis, any thoughts on the accumulating tag issue??

    jay — try downloading the zip again, i’ve added code to flush the terms at each call to the get_terms method. this should normally fix your problem.

    @denis, @jay: I had the same problem with accumulating tags on the front page (and therefore could only use Terms2tags on my “single.php” page).

    Denis, I tried your new code in my “post.php” page. Now, the tags on the front page do not accumulate from post to post. However, the tags will only display for the first post, not for the others below it on the front page. This happens whether I use this, [?php sem_terms2tags(); ?], or this [?php sem_terms2tags( $arbitrary_post ); ?]

    Let me know if I’m missing something obvious. Thanks!

    Hi Denis, I have the exact same problem as tqn…But the accumulation problem is gone which is great.

    Just one other question – is there a way of setting the maximum number of tags??

    i was thinking of adding this too, because the last tags usually are irrelevant.

    before:

    foreach ( $terms as $term )

    add the line:

    $terms = array_slice($terms, 0, 5):

    Hi Denis,

    Works a treat however the line should read,

    $terms = array_slice($terms, 0, 5);

    Meanwhile, is there anything you can do about getting this to work for every post rather than just the one…

    Thanks for all of this!

Viewing 15 replies - 1 through 15 (of 17 total)
  • The topic ‘Semiologic – technorati tags’ is closed to new replies.
Skip to toolbar