Hi @sterosize,
Even though Bricksforge seems to give you a success toast with the “Great! Successfully Saved” message, it seems more like a false-positive is preventing the save in the background. Some plugins will provide a failure message if it’s reacting to the HTTP response via AJAX, but I’m not sure that’s happening here.
We would often recommend having Learning Mode on for a short period while you try to save changes again. If it works, return the firewall to “Enabled and Protecting”.
If you see the saves start failing again when Learning Mode is turned off, visit the Live Traffic page immediately afterwards. If there is a recent block there, check the reason after expanding the entry with the eye icon in the corner. You may find a specific firewall rule or Wordfence setting stated here after expanding the entry. The reason is shown in red text.
Feel free to paste that reason here if you’re unable to manually allowlist it successfully using the “ADD PARAM TO FIREWALL ALLOWLIST” button on the Live Traffic page.
Many thanks,
Peter.
@wfpeter thank you very much. I asked ChatGPT, and it gave me the same instructions. 1. Learning mode on 2. save bricksforge settings 3. learning mode off 4. live traffic 5. ADD PARAM TO FIREWALL ALLOWLIST and it worked for me 🙂
Now i feel a bit saver again and can finally use the “Data Modifier” from Bricksforge.
Have a great day!
That’s great news @sterosize, thanks for letting us know and we’re happy that’s solved for you. If you need to ask any questions about Wordfence in future, by all means start a new topic any time!
Peter.
