Support » Plugin: Autoptimize » Problem with Autoptimize (MultiSites)

  • Resolved lucholj

    (@lucholj)


    Hi ,I hope you are ok;

    I am doing a multisite website but when I installed the Autoptimize plugin I receive the following message. The message is in all sites and even in the mother site.
    What can I do?

    “Autoptimize is enabled and configured on a WordPress network level. Please contact your network administrator if you need Autoptimize settings changed.”

Viewing 15 replies - 1 through 15 (of 15 total)
  • Plugin Author Optimizing Matters

    (@optimizingmatters)

    Sorry to hear it’s broken for you, let’s see what we can do ..

    1. I assume AO was activated on the network level?
    2. There is no “Autoptimize” menu entry in “network admin” -> settings -> autoptimize?
    3. What happens when you try disabling and re-enabling AO at network level?
    4. I assume all is right when enabling AO on a per-site basis?
    5. can you check the value of the autoptimize_enable_site_config option?

    Same just happened here too ?!

    “4. I assume all is right when enabling AO on a per-site basis?” <– nothing change

    Plugin Author Optimizing Matters

    (@optimizingmatters)

    OK, good news (well, fingers crossed); I’ve reviewed relevant code and made some important changes in how multi-site config is handled in the Github-version. Could you download the zip-file from Github and install and activate (with 2.6.0 disabled) and test?

    If all is well, I’ll release 2.6.1 later today/ tomorrow with these fixes included!

    frank

    “2. There is no “Autoptimize” menu entry in “network admin” -> settings -> autoptimize?” <– no, there is not

    Downloaded, and will continue. I’ll be back here to tell how it goes.

    Can you upload that ZIP file with FTP and unzip it on site?

    OK, I’ll remove plugin and then upload all in beta to autoptimize folder…

    • This reply was modified 3 months, 1 week ago by PeteComwest.

    Now there IS “Autoptimize” menu entry in “network admin” -> settings -> autoptimize…

    we’ll see…

    2.6.1 IS WORKING, thanks Frank !!

    • This reply was modified 3 months, 1 week ago by PeteComwest.
    • This reply was modified 3 months, 1 week ago by PeteComwest.
    Plugin Author Optimizing Matters

    (@optimizingmatters)

    OK, that’s a relief 🙂

    If @lucholj can confirm as well I can prepare the official release of 2.6.1 🙂

    @lucholj confirm or not, I’m OK with this 🙂

    If ticked this “Enable Autoptimize configuration per site.” then you can’t change anything but when un-ticked, changes are possible. Is there something you should change?

    All these are un-ticked:

    Optimize JavaScript Code?
    Optimize CSS Code?
    Optimize HTML Code?

    • This reply was modified 3 months, 1 week ago by PeteComwest.
    • This reply was modified 3 months, 1 week ago by PeteComwest.
    Plugin Author Optimizing Matters

    (@optimizingmatters)

    that’s the goal; if that option is ticked, network-level options are not used as config is on a site-level, hence the network-level options are visually marked is not relevant.

    Are you saying that if I make changes on Multisite Options, and leave that
    “Enable site configuration?” un-ticked, it effects for every site? If so, that’s great.

    Plugin Author Optimizing Matters

    (@optimizingmatters)

    Are you saying that if I make changes on Multisite Options, and leave that “Enable site configuration?” un-ticked, it effects for every site? If so, that’s great.

    correct, it was designed to work exactly like that 🙂

    Plugin Author Optimizing Matters

    (@optimizingmatters)

    considering I had @petecomwest’s blessing, 2.6.1 was released with the multisite fixes 🙂

Viewing 15 replies - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.