Support » Plugin: Yasr - Yet Another Stars Rating » Plugin Yasr | Grade cache is not cleared

  • Hello:
    When someone qualifies, such qualification remains unchanged.
    That is, when another visitor enters the message that … “You already rated this article with …”
    Said “error”, is solved when my administration panel, deleted all the caches and, afterwards, I do the same in my CDN panel (Cloudflare).
    This would not be a problem if I realize on time.
    That is, if, for example, I enter an incognito article (as if it were a visitor) and, I see the message in question.
    In which case, all I have to do is go to my panels (WordPress + Cloudflare) and proceed to clear ALL the cache.
    The problem occurs if, as I hope 🙂 many visitors enter at once and qualify an article.
    In this case, most likely, the first one qualifies and, the second one, sees the qualification of the first one and, the “famous” legend of … “You already qualified this article …”
    In consecuense…
    How can I do that, the “blessed” cache, does not allow 2 (or more) visitors to see the same rating on the same article.
    In other words, both the first and the second, the third and, whatever they may be, can qualify an article “freely”.
    I await comments.
    Thank you.
    Greetings.
    P.S:
    For v / info, I use the W3TC cache plugin and, the Cloudflare and CDN, periodically “empty” them. But, my concern is that, when the site (which is still under development) is online and (as I hope 🙂 has many visits and, good grades (heh!) Many of these visitors, they cannot rate my articles because, when it appears the legend … “You already rated this article …”, when you click on the stars, the tool is “buoyant” (circling) and, it does not finish “defining itself” (neither qualifies nor fails to do so: (

    The page I need help with: [log in to see the link]

Viewing 5 replies - 1 through 5 (of 5 total)
  • Thread Starter atutrabajo

    (@atutrabajo)

    Another yes, I say:

    I already tried deactivating the plugin and activating it again, and there was no case.

    On the other hand, I now notice that, the qualifications of some of my articles (not all), still appear even if, I enter “Incognito mode” from a cell phone.

    That is to say, when a visitor qualifies an article, said qualification remains for all new visitors.

    Ergo, when a new visitor enters the same article, the message “… You have already voted …” appears and, therefore, DOESN’T LET IT VOTE.

    Any ideas?

    I await comments.

    Thank you.

    Regards!

    Plugin Author dudo

    (@dudo)

    Hi atutrabajo, yes, I already now about this problem, and I’m already working on it.

    For now you’ve to disable w3c (should work fine with cloudflare)

    For now try to use the supported caching plugins https://wordpress.org/plugins/yet-another-stars-rating/#does%20it%20work%20with%20caching%20plugins%3F

    Best,
    Dario

    • This reply was modified 2 years, 11 months ago by dudo.
    Thread Starter atutrabajo

    (@atutrabajo)

    Hi I doubt:
    First of all, thanks for responding.
    That said, I tell you that …
    1) On my site, I already tried with almost ALL the “compatible” plugins you mention (excess WP-Rocket that is paid) and, frankly, I stayed with W3TC because, it had unique characteristics with respect to the others (For example one better integration with precisely Cloudflare).
    2) On the other hand, it was the only plugin that solved the vast majority of the “problems” that “forced” me to solve PageSpeed ​​(For example, the fucking … “Eliminate the JS that blocks the rendering” … )
    3) Finally, I’ve been (literally) months, trying to find the ideal configuration of this plugin (looking for information in different media).
    Ergo, disable it and, start over, trying another plugin, for me, it’s not a “viable” option, heh!
    I prefer to wait for you to solve it and send the corresponding update and / or some code (for my hatcces.php and / or config.php and / or function.php) to which, fortunately, I have direct access.
    Or, if I could read in one of the 30 pages I read (the last 5 years, heh!) Of the support page, you prefer to give me a line of code to insert into the same plugin 🙂
    Anyway, I prefer to wait for you then, as I said, I plan to take my site to the air, in a couple of weeks and, prior to that, correct the WPO problems that remained unresolved.
    And, as you probably know, the cache with more other performance problems (which the W3TC plugin helped me solve), are essential to try to speed up the site as much as possible (because, in itself, I made the mistake of use a template too “heavy” to which, on top, I added a “truck”, heh!).
    Anyway, I await your comments.
    From already thank you very much.
    Regards!

    Plugin Author dudo

    (@dudo)

    Finally seems like I’m talking with a pro 🙂

    I will come back to work on Yasr on 20 August, I hope to release it with september update, if possible.

    Best,
    Dario

    Thread Starter atutrabajo

    (@atutrabajo)

    Coming from a true technology professional, it’s a compliment. Thank you.
    Although, strictly speaking, I am a complete neophyte of technology and, among us … I hate her!
    But, as on the other hand, I need it, I took the job of analyzing all of them and each of the comments I found among the 30 support pages of the plugin (almost 5 years 🙁
    The rest is pure “effort” and “perseverance” (I have been trying to end my site for almost 1 year and, since I could not pay a professional webmaster, I started to find out everything I could to do it on my own, je !)
    Anyway, from what I see, I will have to wait for the “blessed” update you are talking about but good.
    Finally and, if by chance, you can think of some code to solve it, even temporarily, please do not hesitate to let me know.
    From already thank you very much.
    Regards!

Viewing 5 replies - 1 through 5 (of 5 total)
  • The topic ‘Plugin Yasr | Grade cache is not cleared’ is closed to new replies.