• Resolved HenrikNK

    (@henriknk)


    Hi there,

    I have run into an issue with the alignment of logo and navbar.
    I find it a bit strange since I have another site where I have used similar logo sizes etc and here I do not have the problem.

    My intentions are that the logo (250 x 100) and the navbar should be aligned into 1 line – like on this site http://www.livsholist.dk.

    My problem is that the logo “jumps” so the position is above the navbar – if the screen resolution is higher than 1024 x 768 and the browser window is maximized. http://www.thunbergkiks.dk

    I hope some of your “fresh eyes” will be able to spot what I have done wrong and might come up with some suggestion on how to solve this.

    Thanks in advance

Viewing 4 replies - 1 through 4 (of 4 total)
  • Can’t get to the 2nd link?

    More than likely you need to read this Snippet and use @media code to align different viewports

    Thread Starter HenrikNK

    (@henriknk)

    Sorry about that http://www.thunbergkiks.dk

    Ok thanks for the hint – I however still find it a bit strange since I have tried more or less to use the same sizes/settings on the first site and here I do not face the issues.
    But ok thanks – I guess I will readup on @media codes and how to use them.

    Just a thought…I am not an expert…

    Are you using different plugins on the 2nd site compared to the 1st site?
    Maybe a plugin conflict on the 2nd site?

    Thread Starter HenrikNK

    (@henriknk)

    Deputy05 – and what a great thought.
    I took over the 2nd site a few days ago and yes you were right – the fault was caused by the WP Editor plugin.

    Thanks for your input – Highly appreciated.

Viewing 4 replies - 1 through 4 (of 4 total)
  • The topic ‘Logo navbar alignment with screen resolution above 1024 x 768’ is closed to new replies.