Error 404 for my home page (7 posts)

  1. Sarapoff
    Posted 4 years ago #

    My problem is that when I'm logging in on my home page I get a

    Error 404 message. It doesn't do that on other pages. Tried to change theme, going back to default top page, change the permalinks settings back and forth, and other little tricks which used to work. But now, it's as if he home page was somehow erased...

    What can i do to solve this mystery?

    Thanks for your help!!

  2. Pioneer Web Design
    Posted 4 years ago #

    A) Check your site at Securi, if OK:
    B) Provide site link.

  3. Sarapoff
    Posted 4 years ago #

    So I jst checked with the link to Sucuri for malwares... my site is ok.

    My site

  4. Pioneer Web Design
    Posted 4 years ago #

    Actually, Securi could not complete the site scan due to the error you noted...

    Look at this previous post, re, Timthumb and colorway...

    There are other issues noted in this forum about the theme limitations etc.

    I would, use an FTP tool or your webhost file manager to rename the colorway folder to old-colorway and try to login (this should then load the default theme)...then contact the theme dev.

  5. Sarapoff
    Posted 4 years ago #

    Thanks I'll try what you say... but that problem is Not only with Colorway theme.
    I activated different themes I had and it gives me the same 404 message for all of them!

    So, if it's not the server and not the theme - it's bound to be something in WordPress - I'm not certain but I think I had that problem since 2 or 3 updates. I used to be able to fix it, but this time not.

  6. Pioneer Web Design
    Posted 4 years ago #

    Change your front page back to posts with the default theme activated and see how that goes...should be OK..then create a new page and set that as the Front Page (again still in default theme)...If that works, try switching themes to yours and see if you have same issue...

  7. InkThemes
    Posted 4 years ago #

    Seems like you have your reading settings are incorrectly setup.

    Make sure you have the reading settings setup something like given below.

Topic Closed

This topic has been closed to new replies.

About this Topic