Upload sermons to your website, where they can be searched, listened to, and downloaded. Easy to use with comprehensive help and tutorials.
SermonBrowser only displays your sermons where you choose. You need to create the page/post where you want the sermons to appear (or edit an existing one), and add [sermons] to the page/post. You can also add some explantory text if you wish. If you do so, the text will appear on all your sermons pages. If you want your text to only appear on the list of sermons, not on individual sermon pages, you need to edit the SermonBrowser templates (see customisation).
SermonBrowser tries to set the correct permissions on your folders for you, but sometimes restrictions mean that you have to do it yourself. You need to make sure that SermonBrowser is able to write to your sermons upload folder (usually
/wp-content/uploads/sermons/). This tutorial explains how to use the free FileZilla FTP software to do this.
The most likely cause is that you're reaching either the maximum filesize that can be uploaded, or the maximum time a PHP script can run for. Editing your php.ini may help overcome these problems - but if you're on shared hosting, it's possible your host has set maximum limits you cannot change. If that's the case, you should upload your files via FTP. This is generally a better option than using your browser, particularly if you have several files to upload. If you do edit your php.ini file, these settings should be adequate:
file_uploads = On upload_max_filesize = 15M post_max_size = 15M max_execution_time = 600 max_input_time = 600 memory_limit = 48M
If you are using a version of WordPress older than 3.6, you need to install and activate your favourite WordPress MP3 plugin. WordPress 3.6 has the MediaElement.js player built-in; if you are running an older version of WordPress, you can install the Mediaelement.js plugin. SermonBrowser also supports any WordPress MP3 player that allows you add the player by entering shortcodes in a post or page. To use a different media player plugin, change the MP3 shortcode setting on the Sermons, Options admin page.
Several Bible versions are supported by Sermon Browser. To switch to a different version, go to Options, and edit the single template. Replace
[esvtext] with the appropriate template tag for the alternative version.(Template tags are listed on the
Customisation page of this site). For example, to switch to the KJV, use the tag
[kjvtext]. Thanks go to Crossway for providing access to the ESV, bible.org for the NET Bible. Other versions are supplied by SermonBrowser itself.
There are lots of other versions available in non-English languages. This forum post describes what is available and how to add a new version to your Sermon Browser installation.
You can also use the RefTagger plugin, though this shows even few verses. Even worse (for our purposes) the bible passage only shows when you hover over a special link with your mouse. It does, however, provide an even longer list of translations. Please be aware that both RefTagger and eBibleicious will add bible text to bible references across your whole website, not just your sermons pages.
To use either of these alternatives, just download, install and activate them as you would for any other plugin. Check their settings (make sure you enter get an API key if you're using eBiblicious). You then need to make one change to your SermonBrowser options. In the Single Sermon form, look for
[esvtext] and replace it with
[biblepassage]. (By default it's right at the end of the code.)
SermonBrowser comes with several widgets you can add to your sidebars - just go to Appearance and choose Widgets.
If you want to add sermons elsewhere on your site, and you are comfortable in editing template files, add the following code:
<?php if (function_exists('sb_display_sermons')) sb_display_sermons(array('display_preacher' => 1, 'display_passage' => 1, 'display_date' => 1, 'display_player' => 0, 'preacher' => 0, 'service' => 0, 'series' => 0, 'limit' => 5, 'url_only' => 0)) ?>. Each of the values in that line can be changed or omitted (if they are omitted, the default values are used). For example, you could just use:
<?php if (function_exists('sb_display_sermons')) sb_display_sermons(array('display_player' => 1, 'preacher' => 12) ?>. The various array keys are used to specify the following:
You could, of course, change your host to someone a little more generous! You should also make sure you encode your sermons at a medium to high compression. Usually, 22.05kHz, 48kbps mono is more than adequate (you could probably go down to 32kbps for even higher compression). 48kbps means every minute of recording takes up 360kb of disk space, so a thirty minute sermon will be just over 10Mb. At this setting, 5Gb would be enough for over 450 sermons.
If you can't change your host, you can still use SermonBrowser. You'll just have to upload your sermon files to another site - preferably a free one! You can then use the other site's embed code, or just link to the MP3 file if they allow you (when you add your sermon to SermonBrowser, select "Enter an URL" and paste it in).
You can't - but you can upload videos to other sites, then embed them in your sermons. You can use any site that allows you to embed your video in other websites, including YouTube, but we recommend Vimeo as the most suitable for sermons. That's because most video-sharing sites are designed for relatively short clips of 10 minutes or so, but Vimeo will accept videos of any length - and there are no quotas for the maximum size of a video, nor the number of videos you can store. Once your video is uploaded and available on Vimeo or YouTube, you can copy the embed code it gives you, edit your sermon, select "Enter embed code" and paste it in. If you are using a video plugin, you can even use that plugin's shortcode in the embed code.
The link is there so that people from other churches who listen to your sermons can find out about SermonBrowser themselves. But if you'd like to remove the link, just remove [creditlink] from the templates in SermonBrowser Options.
In SermonBrowser options, you are able to change the address of the public podcast feed. This is the feed that is shown on your sermons page, and is usually the same as your private feed (i.e. you won't need to change it). However, if you use a service such as FeedBurner, you can use your private feed to send data to feedburner, and change your public feed to your Feedburner address. If you do not use a service like Feedburner, just make sure your public and private feeds are the same.
The link under Subscribe to Podcast for "All sermons" gives a podcast of all sermons that you add to your site through SermonBrowser. But it may be that some people may just want to subscribe to a feed for certain speakers, or for a certain service. If they wish to do this, they should set the search filters and perform their search, then click on the subscribe link for "Filtered sermons." This will give them a podcast according to the filter they selected. You could also copy this link, and display it elsewhere on the site - for example to provide separate feeds for morning and evening services.
Yes. Use the shortcode
[sermons dir=asc] instead of just
You've probably changed the address of your public feed to an incorrect value. Try changing it back to the same value as your private feed in Sermon Options.
Yes, definately, although you need to know a little HTML and/or CSS. SermonBrowser has a powerful templating function, so you can exclude certain parts of the output (e.g. if you don't want the links to other sermons preached on the same day to be displayed). The Customisation section has much more information.
The search form is set to roughly 500 pixels, which should be about right for most WordPress templates. To change it, look for a line in the CSS stylesheet that begins
table.sermonbrowser td.field input, and change the width specified after it. To make the form narrower, reduce the width. To make it bigger, increase the width. You'll also need to change the width of the date fields on the line below, which should be 20 pixels smaller.
Alternatively, you could try using the one-click style filter, which is inherently responsive. The one-click style filter is selected on the Sermons, Options admin screen.
This usually happens for one of three reasons: (1) The Bible texts are provided by external websites, and sometimes they can go down. If you can't see Genesis 1 then the problem is with those websites. They're rarely down for long. (2) If you specify an invalid bible passage (e.g. Romans 22). If this is the case your sermon page will display ERROR: No results were found for your search. (3) If your webhost has disabled allow_url_fopen and cURL. Some cheaper webhosts have these essential features switched off. If they have, you won't be able to use this facility.
The ESV website only allows 5,000 lookups per day from each IP address. That should be enough for most users of SermonBrowser. However, if you are using a shared host, there will be hundreds (perhaps thousands) of other websites on the same IP address as you. If any are also using the ESV API, they also get counted towards that total. If you are using less than 5,000 lookups per day (i.e. you are having less than 5,000 pageviews of your sermon pages), and you receive the error message you'll need to do two things in order to continue to display the text. (1) Sign up for an ESV API key. (2) Edit frontend.php (one of the SermonBrowser files). Look for the function
sb_add_esv_text (at the time of writing it began on line 412), and replace ...
passageQuery?key=IP&passage=... with ...
If you are having more than 5,000 page views per day, then this won't help. Instead, leave a message on the forum explaining your problem. SermonBrowser could probably be modified to provide a caching mechanism to reduce the likelihood of this error occurring, if there is demand.
You'll need to edit the
filetypes.php file that comes with Sermon Browser. The icon is chosen on the basis of the file extension (or in the case of URLs the file extension then the site address). If you do create new icons for other filetypes, consider sending them to the author so they can be included in future versions of the plugin.
Sermon Browser has an active support forum on sermonbrowser.com. If you post there looking for help on your website, don't forget to include a link to your site.
Yes. There are additonal FAQs on the Sermon Browser support forum.
Requires: 2.9.2 or higher
Compatible up to: 3.8.10
Last Updated: 2014-1-29
Active Installs: 5,000+
0 of 1 support threads in the last two months have been resolved.
Got something to say? Need help?